Formlabs was one of the early Kickstarter success stories, and its laser-blasting 3D printers are now used by model makers, prototypers, dentists, and maybe even action figure companies around the globe. But its newest printers are ditching those resin-blasting lasers because theyâre comparatively slow.
Business
Gold price high by Rs500 per tola in Pakistan
According to the association, the price of gold has settled at Rs250,700 per tola.
Karachi: There has been a slight increase in the price of gold across the country.
According to All Pakistan Gems and Jewelers Association (APGJA), an increase of 500 rupees was recorded in the price of gold across the country.
According to the association, the price of gold has settled at Rs250,700 per tola.
On the other hand, the price of gold in the world market increased by $5 to be sold at the rate of $2380 per ounce.
Pakistan
DC Rawalpindi rejects plea of PTIÂ
However, PTI is challenging the DC Rawalpindiâs verdict in high court. Â Â
Rawalpindi: The deputy commissioner (DC) Rawalpindi has rejected the plea of Pakistan Tehreek-e-Insaf’s (PTI) rally in Liaqatabad.
According to the details, DC rejected the plea of PTI regarding to hold a rally in Liaqatabad because of the prediction related to spoil law and order situation.
On this the PTI’s provincial president Seemabia Tahir stated that the government is afraid of PTI’s rally that is why it is not allowing the party to hold a rally.
However, PTI is challenging the DC Rawalpindi’s verdict in high court.
Technology
Formlabsâ new pro 3D printers claim 2â5x speed by ditching lasers for an LCD screen
With the new Form 4, Formlabs says you can print two to five times faster than its predecessor, the Form 3 Plus â with an LCD screen that cures resin one layer at a time.
With the new Form 4, Formlabs says you can print two to five times faster than its predecessor, the Form 3 Plus â by switching to an LCD screen and a bright backlight that can cure an entire layer of resin at a time.
Thatâs a common technique in prosumer resin printers already, one called masked stereolithography (mSLA), but Formlabs claims itâs managed to build a printer to do it at a higher quality than ever before. Even so, it may not have quite the same resolution as previous Formlabs printers, with a horizontal pixel size of 50 microns, down from 25 microns. (Both printers go down to 25 microns vertically.)
But between the companyâs new âLow Force Displayâ light engine for curing resin and a series of new faster curing resins, speed is greatly increased up to 100mm per hour vertically. The company says most prints should take under two hours, and small items like dental arches could be completed in just minutes. âItâs not overnight fast, itâs while I grab a coffee fast,â boasts CEO Maxim Lobovsky.
Formlabs claims you could beat an injection molding machine with four of its $4,500 printers, if youâre printing batches of small parts like these:
(Mind you, 3D printed resin parts have to be washed afterward, but injection molded ones need their excess plastic cut away; Formlabs third-party spokesperson Meredith Chiricosta tells me post-processing time is roughly the same.)
It doesnât hurt that the Form 4 can spit out more and larger parts than its predecessor, too, with 30 percent more build volume and 19 percent more build area â parts can be 10.7 inches long, compared to 8.8 inches previously. You also get an integrated 5-megapixel camera to monitor prints and generate timelapse videos, a larger seven-inch touchscreen, and Wi-Fi 5 (up from Wi-Fi 4 previously), as well as USB-C (instead of USB-B) and Gigabit ethernet.
Reviews of Formlabsâ printers sometimes criticize the high price of the consumable resin, and thatâs something the companyâs improving today, too â four of the new âGeneral Purpose Resinsâ that offer âimproved toughness and colorâ will start at $99 per liter, down from the $149 you pay for the companyâs entry-level resins today. The company says its resin tanks will cost less and last longer, too. It does consume over twice the electricity at 480W versus 220W, but electricity is comparatively cheap.
Formlabs will also sell a Form 4B version of the printer for medical and dental use. Itâs $6,299, and both are available today.
If youâre interested, the company is hosting a keynote today at 9AM ET to discuss the finer points of the new printers:
-
Pakistan 1 day ago
By-elections: Two exams of intermediate postponed
-
Pakistan 1 day ago
Asif Zardari to address joint session of Parliament today
-
Pakistan 21 hours ago
Joint session of Parliament: Zardari's address, opposition protests
-
World 4 hours ago
10 including army chief killed in Kenyan helicopter crash
-
Pakistan 1 day ago
Badar Shehbaz appointed as media coordinator of Shehbaz SharifÂ
-
Pakistan 2 days ago
Nawaz Sharif gets clean chit in Tosha Khana vehicles referenceÂ
-
Pakistan 1 day ago
Use of plastic bags banned across Punjab
-
Pakistan 2 days ago
Court postpones hearing on May 7 on Toshakhana reference